MAXIMUM USE OF ENERGY
Maximum use of heat and trouble-free operation thanks to the walls of the device made of high quality cast iron with a thickness of 8 mm.
Combustion of fuel particles thanks to deflector, which extends the exhaust gas path.
Manual control of the combustion process through the ashpan.
Turbofan, a special device, which task is to efficiently distribute the heat generated by the device in room, where it works.
The unit meets the requirements of Ecodesign standards.
SAFETY AT THE HIGHEST LEVEL
Classic front of insert is equipped with a heat-resistant ceramics that can withstand temperatures up to 660°C.
Decorative fence helps to maintain the tidiness and protects against falling out of wood.
CONVENIENT TO USE
The cold handle system allows to disassembly it when the stove is in use.
Ash drawer / ashtray, where the remains of burnt wood are gathered and grate for easy ash removal.
Reduced soot deposition through a system of pure glass (air curtain).
TURBOFAN is available for purchase only with free-standing stove - K6, K7, K8, K9 and K10.
Turbofan is a device which function is to efficiently distribute the heat produced by a free standing stove throughout the room. It is an integral part of the stove, placed on the rear panel, which does not affect the aesthetic qualities of the device. Its operation is simple and is based on the increased air flow along the rear walls of the unit, receiving heat and transfering it to the room.
The system includes built in turbine attached to the cover, which is at the same time a passageway and the thermostat. The thermostat consists a controller and a head forming a temperature sensor. As the temperature rises at the back of the fireplace wall, head heats up. After reaching a certain temperature sensor system automatically starts and the turbine starts its work. The air is sucked in from the room through the two openings at the front and bottom of the turbine casing. Air flow removes the heat from the back of the fireplace wall and passes it to the room. Operating temperature from 50 to 300°C.
This type of solution significantly increases the comfort of use the stove, because the user has the ability to decide in what temperature the back wall system will be activated, this increases the efficiency of transmission of heat to the room.